Why is the buckle-type end tape more advantageous compared to winding pipes and corrugated pipes

The buckle end belt originated in Japan and entered China in 2004. The buckle end belt is composed of PVC cloth and POM buttons. The distance between the buckle and the buckle on the same horizontal line is 5cm, so it is more convenient and concise than the corrugated pipe buckle end belt. The corrugated pipe can only put a few strands of wires in. It is not easy to disassemble, and it is basically fixed, and the buckle-type end strap is buttoned up to wrap the multi-stranded wire. It can be disassembled at any time, just like a person wearing clothes. It can be taken off when you want to wear it. , So it is much more convenient than bellows. It seems that the specifications of the winding tube were small at first, and there was no winding tube with a large diameter, and it was inconvenient to use the winding tube.

Therefore, relatively speaking, the buckle end belt is a taller route from the point of view of certification. It not only meets the six major international standards of ROHS, and the fire rating of 94V-0, but more importantly, there is no asbestos in the finished product. It greatly increases the safety of the users, so the buckle end belt is more superior and advanced than the general protective wire casing.

So compared to the winding pipe and the corrugated pipe, the buckle end tape will be more advantageous.